Robust simulation of water atomization

Abstract

This paper describes a methodology for prediction of powder packing densities which employs a new approach, designated as random sphere construction (RSC), for modelling the shape of irregular particles such as those produced by water atomization of iron. The approach involves modelling an irregular particle as a sphere which incorporates smaller corner spheres located randomly at its surface. The RSC modelling technique has been combined with a previously developed particle packing algorithm (the random build algorithm), to provide a computer simulation of irregular particle packings. Analysis of the simulation output data has allowed relationships to be established between the particle modelling parameters employed by the RSC algorithm, and the density of the simulated packings. One such parameter is η, which is the number of corner spheres per particle. A relationship was established between η (which was found to have a profound influence on packing density), and the fractional density of the packing, fd. Vision system techniques were used to measure the irregularity of the simulated particles, and this was also related to η. These two relationships were then combined to provide a plot of fractional density for a simulated packing against irregularity of the simulated particles. A comparison was made of these simulated packing densities and observed particle packing densities for irregular particles, and a correlation coefficient of 0.96 was obtained. This relatively good correlation indicates that the models developed are able to realistically simulate packing densities for irregular particles. There are a considerable number of potential applications for such a model in powder metallurgy (PM), process control. In combination with on-line particle image analysis, the model could be used to automatically predict powder densities from particle morphology.