Abstract

This paper addresses the joint robust power control and beamforming design of a linear multiuser multiple-input multiple-output (MIMO) antenna system in the downlink where users are subjected to individual signal-to-interference-plus-noise ratio (SINR) requirements, and the channel state information at the transmitter (CSIT) with its uncertainty characterized by an ellipsoidal region. The objective is to minimize the overall transmit power while guaranteeing the users' SINR constraints for every channel instantiation by designing the joint transmitreceive beamforming vectors robust to the channel uncertainty. This paper first investigates a multiuser MISO system (i.e., MIMO with single-antenna receivers) and by imposing the constraints on an SINR lower bound, a robust solution is obtained in a way similar to that with perfect CSI. We then present a reformulation of the robust optimization problem using S-Procedure which enables us to obtain the globally optimal robust power control with fixed transmit beamforming. Further, we propose to find the optimal robust MISO beamforming via convex optimization and rank relaxation. A convergent iterative algorithm is presented to extend the robust solution for multiuser MIMO systems with both perfect and imperfect channel state information at the receiver (CSIR) to guarantee the worst-case SINR. Simulation results illustrate that the proposed joint robust power and beamforming optimization significantly outperforms the optimal robust power allocation with zeroforcing (ZF) beamformers, and more importantly enlarges the feasibility regions of a multiuser MIMO system.

Highlights

  • The rapid growth of wireless communications services has brought severe challenges to the design of reliable and efficient communications systems

  • This paper aims to devise a robust multiuser multiple-input multipleoutput (MIMO) power and beamforming solution which optimizes the power allocation and the transmit and receives beamforming vectors of the users jointly, to minimize the overall transmit power in the downlink while guaranteeing the users’ individual signal-to-interference-plus-noise ratio (SINR) constraints for every possible channel error conditions, in the presence of imperfect channel state information at the transmitter (CSIT) and perfect/imperfect channel state information at the receiver (CSIR) uncertainty modeled by an ellipsoid

  • The proposed algorithm and the optimal power-only allocation achieve slightly greater SINR than the target, which is expected because the optimization is done in a way that the target can still be achieved at the worst error conditions

Read more

Summary

Introduction

The rapid growth of wireless communications services has brought severe challenges to the design of reliable and efficient communications systems. With perfect channel state information (CSI), it is known that the channel capacity can be achieved using dirty-paper coding (DPC) in the MIMO downlink [9, 10]. This nonlinear optimal strategy is not suitable for practical implementation and the beamforming alternatives have attracted much interests for their low complexity to realize the capacity enhancement [13,14,15,16,17,18,19]

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call