Robust fault diagnosis observer design using H

Abstract

This paper presents a new approach to the design of a robust observer-based fault detection scheme for diagnosing incipient faults, the H/sub /spl infin////spl mu/ robust fault detection observer (RFDO) which takes into account the robustness of the fault detection observer against disturbances and sensitivity to faults simultaneously. The approach has originated from the robust H/sub /spl infin////spl mu/ estimator which minimises the effect of disturbance on the estimation error and subsequently on the diagnostic residual. The effect of faults on the diagnostic residual is maximised by the proper selection of the performance bound and the estimation weighting matrix of the H/sub /spl infin// robust estimator. Depending on the class of uncertainty modelling considered, one or two Riccati equations are required for the H/sub /spl infin// estimator design. The H/sub /spl infin// estimator can be designed to be robust against; disturbance only, disturbance and parameter uncertainty only, or disturbance and a large variety of modelling errors. The /spl mu/ robust estimator assumes a block diagonal structure for uncertainty and can produce a less conservative estimation error. The approach has been applied to a third-order system example chosen to demonstrate special design features. The results show that the fault detection scheme can detect incipient faults effectively even in the presence of disturbances and modelling errors.