Abstract

The event-triggered energy-to-peak filtering for polytopic discrete-time linear systems is studied with the consideration of lossy network and quantization error. Because of the communication imperfections from the packet dropout of lossy link, the event-triggered condition used to determine the data release instant at the event generator (EG) can not be directly applied to update the filter input at the zero order holder (ZOH) when performing filter performance analysis and synthesis. In order to balance such nonuniform time series between the triggered instant of EG and the updated instant of ZOH, two event-triggered conditions are defined, respectively, whereafter a worst-case bound on the number of consecutive packet losses of the transmitted data from EG is given, which marginally guarantees the effectiveness of the filter that will be designed based on the event-triggered updating condition of ZOH. Then, the filter performance analysis conditions are obtained under the assumption that the maximum number of packet losses is allowable for the worst-case bound. In what follows, a two-stage LMI-based alternative optimization approach is proposed to separately design the filter, which reduces the conservatism of the traditional linearization method of filter analysis conditions. Subsequently a codesign algorithm is developed to determine the communication and filter parameters simultaneously. Finally, an illustrative example is provided to verify the validity of the obtained results.

Highlights

  • Networked control systems (NCSs) use shared communication networks to exchange information among system components such as sensors, controllers, actuators, and filters

  • One can see that the above-mentioned works on event-triggered filtering do not take the packet loss of potentially incomplete communication network into consideration, which may lead to the degradation of system estimation performance when the designed filter is implemented in practice

  • The main work is to find the worst-case bound on the number of consecutive packet dropouts of triggered instants generated by eventtriggered condition (4), which marginally guarantees the effectiveness of the filter designed on the basis of (14)

Read more

Summary

Introduction

Networked control systems (NCSs) use shared communication networks to exchange information among system components such as sensors, controllers, actuators, and filters. One can see that the above-mentioned works on event-triggered filtering do not take the packet loss of potentially incomplete communication network into consideration, which may lead to the degradation of system estimation performance when the designed filter is implemented in practice. Based on the above discussions, this paper studies the event-triggered energy-to-peak filter design problem for a class of discrete-time polytopic uncertain system with the communication consideration of lossy network and quantization. A codesign algorithm of communication and filter parameters is given, depending on the relationship among the estimation of maximum allowable number of packet losses, the knowledge of the network being used, and the dynamic information of the considered discrete-time system. (i) The robust energy-to-peak event-triggered filtering problem for polytopic uncertain discrete-time systems with simultaneous consideration of networkinduced delay, signal quantization, and packet loss is studied. The symbol ∙ represents the symmetric term in a symmetric matrix

Problem Formulation
Communication
Main Results
Filter Analysis
An Illustrative Example
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call