Robust estimation of shear wave velocity in a carbonate oil reservoir from conventional well logging data using machine learning algorithms

Abstract

In recent decades, various applications of shear wave velocity have been reported in oil and gas projects. These applications include the determination of lithology, estimation of geomechanical parameters, reservoir fluid detection, etc. The shear wave velocity is usually measured or recorded by DSI (Dipole Shear Sonic imager) instruments. This log is not usually available in all wells of a hydrocarbon field because of the high cost of running this log compared to other conventional logs. However, it is tried to estimate the shear wave velocity from other related logs.The literature contains many empirical rock physics models used to estimate shear wave velocity. Most of them were developed for sandstone lithologies and didn't applicable in carbonate reservoir because of existing some vertical and horizontally complex fracture networks in the carbonate reservoirs that cause a quite different behavior for the shear wave velocity.The main objective of this research is to concentrate on the effect of lithology in the estimation of the target log for a carbonate reservoir. At the earliest step, preprocessing is performed and 455 data points of several conventional well logs, i.g., acoustic, density, neutron porosity, resistivity, gamma-ray, calcite volume, dolomite volume, and water saturation logs have been applied to generate the synthetic shear wave velocity log in a carbonate oil reservoir.First, original data are divided into training, validation, and testing subsets. Different data-driven predictive models were built: Multiple Linear Regression (MLR), Ensemble Learning Method (ELM), and three architectures of Artificial Neural Networks (ANN). The performance of all techniques was compared with each other. Finally, the feed-forward neural network shows the highest accuracy with R-values of 0.99 and 0.96 for the training and testing datasets. Moreover, the network design and tuning parameters of the model are adjusted using the grid search optimization technique to obtain the optimal design of the artificial neural network for estimating the shear wave velocity log. Hence, a deep artificial neural network, i.e., [8–11–15-1] network with bayesian regularization training algorithm and hyperbolic tangent sigmoid transfer function, is proposed to predict the target response in other wells.