Abstract
Investigation was conducted on roasting properties of pellets with an iron concentrate of complex mineral composition. The results indicated that the pellets of complex mineral composition concentrate required higher preheating temperature and longer preheating time than that of single magnetite concentrate. Therefore, it is difficult for preheated pellets to withstand the mechanical collision in the roasting process in rotary kiln. It was found that after the iron concentrate being subjected to high pressure roll grinding, the specific surface area reached 2029. 1 cm 2/g. Consequently, the preheating and roasting temperature of pellets were decreased by 70 and 50 °C and preheating and roasting time were decreased by 2 and 4 min, respectively. Meanwhile, the compression strength of preheated and roasted pellets were increased by 200 N for a pellet and 220 N for a pellet, respectively. The mechanism lied in that the increase of specific surface area activated thermal reaction and promoted formation of inter-grain bridge.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
