Abstract

Abstract. Satellite remote sensing imagery and numerical modelling were used for the study of river bulge evolution and dynamics in a non-tidal sea, the Gulf of Riga (GoR) in the Baltic Sea. Total suspended matter (TSM) images showed a clearly formed anti-cyclonically rotating river bulge from Daugava River discharge during the studied low wind period. In about 7–8 days the bulge grew up to 20 km in diameter, before being diluted. A high-resolution (horizontal grid step of 125 m) General Estuarine Transport Model (GETM) was used for detailed description of the development of the river plume in the southern GoR over the period when satellite images were acquired. In the model simulation, the bulge growth rate was estimated as rb ∼ t0.5 ± 0.04 (R2 = 0.90). Both the model simulation and the satellite images showed that river water was mainly contained in the bulge and there were numerous intrusions at the outer perimeter of the bulge. We performed numerical sensitivity tests with actual bathymetry and measured river runoff without wind forcing (1) having an initial three-dimensional density distribution, and (2) using initially a homogeneous ambient density field. In the first case, the anti-cyclonic bulge did not develop within the course of the model simulation and the coastal current was kept offshore due to ambient density-driven circulation. In the second case, the river plume developed steadily into an anti-cyclonically recirculating bulge, with rb ∼ t0.28 ± 0.01 (R2 = 0.98), and a coastal current. Additional simulations with constant cross-shore and alongshore winds showed a significant effect of the wind in the evolution of the river bulge, even if the wind speed was moderate (3–4 m s−1). While previous studies conclude that the mid-field bulge region is governed by a balance between centrifugal, Coriolis and pressure gradient terms, our study showed that geostrophic balance is valid for the entire mid-field of the bulge, except during the 1–1.5 rotation period at the beginning of the bulge formation. In addition, while there is discharge into the homogenous GoR in the case of a high inflow Rossby number, the river inflow might split into two jets, with strong mixing zone in-between, in the plume near-field region.

Highlights

  • River water entering a coastal ocean typically forms a buoyant plume with an expanding anti-cyclonically rotating bulge near the river mouth and a coastal current in the coastally trapped wave direction (Fong and Geyer, 2002)

  • The MERIS images were processed using the Case-2 Regional (C2R) algorithm (Doerffer and Schiller, 2007, 2008) in the BEAM software package in order to apply atmospheric correction and to obtain the reflectance values used for Total suspended matter (TSM) retrieval

  • The C2R algorithm has been validated in various locations in the optically complex waters of the Baltic Sea, and it has proven to be suitable for water quality monitoring (e.g. Siitam et al, 2014; Attila et al, 2013; Vaiciuteet al., 2012)

Read more

Summary

Introduction

River water entering a coastal ocean typically forms a buoyant plume with an expanding anti-cyclonically rotating bulge near the river mouth and a coastal current in the coastally trapped wave direction (Fong and Geyer, 2002). Coastal currents are favoured in the case of low-discharge conditions and downwelling winds, while bulge formation is favoured during high-discharge conditions and upwelling winds (Chant et al, 2008). The anti-cyclonically recirculating bulge is characteristic of the surface advective plume (Yankovsky and Chapman, 1997), being a prominent feature in rotating tank experiments and numerical simulations under ideal conditions (Avicola and Huq, 2003; Horner-Devine et al, 2006; Thomas and Linden, 2007). 25–70 % of river water is trapped in the bulge (Fong and Geyer, 2002). Observations of the evolution of the bulge over a certain time period are almost non-existent, with the ex-

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call