Abstract

Abstract In this paper, we present a rigorous coupled-wave analysis (RCWA) of absorption enhancement in all-silicon (Si) photodiodes with integrated hole arrays of different shapes and dimensions. The RCWA method is used to analyze the light propagation and trapping in the photodiodes on both Si-on-insulator (SOI) and bulk Si substrates for the datacom wavelength at about 850 nm. Our calculation and measurement results show that funnel-shaped holes with tapered sidewalls lead to low back-reflection. A beam of light undergoes a deflection subsequent to the diffraction in the hole array and generates laterally propagating waves. SOI substrates with oxide layers play an important role in reducing the transmission loss, especially for deflected light with higher-order diffraction from the hole array. Owing to laterally propagating modes and back-reflection on the SiO2 film, light is more confined in the thin Si layer on the SOI substrates compared to that on the bulk Si substrates. Experimental results based on fabricated devices support the predictions of the RCWA. Devices are designed with a 2-μm-thick intrinsic layer, which ensures ultrafast impulse response (full-width at half-maximum) of 30 ps. Measurements for integrated photodiodes with funnel-shaped holes indicate an enhanced external quantum efficiency of more than 55% on the SOI substrates. This represents more than 500% improvement compared to photodiodes without integrated phototrapping nanoholes.

Highlights

  • For the widely used short-reach (

  • In this paper, we present a rigorous coupledwave analysis (RCWA) of absorption enhancement in all-silicon (Si) photodiodes with integrated hole arrays of different shapes and dimensions

  • Microscale and nanoscale light-trapping hole arrays were integrated into photodiodes with a thin absorption region to achieve high enhancement quantum efficiency (EQE) while ensuring an ultrafast response

Read more

Summary

Introduction

An all-Si PIN photodiode offers clear advantages of IC process compatibility to significantly reduce the cost in manufacturing and packaging [2]. It is difficult for a traditional Si photodiode used predominantly in the visible wavelength regime to meet the requirements on both high efficiency and high speed at near-infrared wavelengths. Gou et al.: Rigorous coupled-wave analysis of absorption enhancement quantum efficiency (EQE) of more than 50% [3]. Such thickness leads to a long transit time of photogenerated carriers and limits the data rate to a maximum of 4 Gb/s. The absorption of the intrinsic layer needs to be effectively enhanced without increasing the thickness

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call