Abstract
The rheological properties of two non-polar liquids [silicone oil or perfluorinated oil (FC70)] containing various types of particles, barium titanate, nickel and iron oxide, were investigated as functions of solid loading, particle size and shear rate. All the particles were synthesised in-house. The viscosities of either silicone oil or FC70 containing different solid loadings (10, 20 and 30 g/L) were measured over the shear rate range of 0.10–10 s−1. All the nanofluids showed shear-thinning behaviour within this range and the viscosities increased with the increase of concentrations of nanoparticle and with the decrease of particle size. The highest increase of viscosity was found to be caused by nickel particles in silicone oil due to the formation of Ni network.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.