Abstract
The present study is focused on rheological properties of AlSi10Mg aluminium alloy produced by selective laser melting (SLM) at temperatures of hot deformation with the aim to investigate the dependence of strain resistance on temperature, strain rate and strain degree. As-build cylindrical specimens made of AlSi10Mg aluminium alloy was examined on a cam plastometer in temperature range 20 – 500 °C, at strain rate ξ equal to 1, 10 s-1 up to strain degree e equal to 1.2. The paper presents results of study of initial microstructure, microhardness measurement and flow curves of AlSi10Mg alloy produced by SLM. The flow curves of AlSi10Mg alloy produced by SLM can be used in the computer simulation and development of new manufacturing methods of the metallic parts by additive technologies with the use of deformation post-treatment.
Highlights
Nowadays, additive manufacturing (AM), the layer-by layer building-up of parts from metals and alloys, represents an option for small scale production due to advantages such as reduction in leadtime, reduced material wastage, freedom in the design of the parts [1,2,3,4,5,6,7,8,9]
The present study is focused on rheological properties of AlSi10Mg aluminium alloy produced by selective laser melting (SLM) at temperatures of hot deformation with the aim to investigate the dependence of strain resistance on temperature, strain rate and strain degree
As-build cylindrical specimens made of AlSi10Mg aluminium alloy was examined on a cam plastometer in temperature range 20 – 500 °C, at strain rate ξ equal to 1, 10 s-1 up to strain degree e equal to 1.2
Summary
Additive manufacturing (AM), the layer-by layer building-up of parts from metals and alloys, represents an option for small scale production due to advantages such as reduction in leadtime, reduced material wastage, freedom in the design of the parts [1,2,3,4,5,6,7,8,9]. The present study is focused on rheological properties of AlSi10Mg aluminium alloy produced by selective laser melting (SLM) at temperatures of hot deformation with the aim to investigate the dependence of strain resistance on temperature, strain rate and strain degree.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
