Abstract
Porous asphalt pavements are widely used in rainy and wet areas for their skid resistance, noise reduction, runoff minimization and environmental sustainability. Long-term moisture vapor erosion and the destabilization of large pore structures can easily result in pavement problems such as fragmentation, spalling, cracking, and excessive permanent deformation. To this end, four different preventive maintenance materials, including the rejuvenation (RJ), cohesion reinforcement (CEM), polymerization reaction, and emulsified asphalt (EA) types, were selected in this paper to improve the high-viscosity porous asphalt pavement. The effects of the different preventive maintenance materials on the temperature sensitivity, rheological properties and fatigue performance of high-viscosity modified asphalt were evaluated through temperature sweep, frequency sweep, multi-stress creep recovery (MSCR), linear amplitude sweep (LAS), and bending beam rheometer (BBR) tests. The results showed that the four preventive maintenance materials exhibit different enhancement mechanisms and effects. RJ improves the fatigue properties, deformation resistance and low-temperature cracking resistance of aged asphalt by adding elastomeric components; CEM materials are more conducive to increasing the low-temperature crack resistance of aged asphalt; while GL1 and EA improve the viscoelastic behavior of aged asphalt, but the effect of the dosing ratio needs to be considered.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
