Abstract

Epoxy resin nanocomposites suspended with carbon nanofibers (CNFs) have been prepared. A bifunctional coupling agent, 3-aminopropyltriethoxysilane, is used to treat the acid oxidized fibers. The dispersion quality of the CNFs with and without surface modification is monitored by an oscillatory rheological investigation. The addition of fibers is observed to influence the rheological behaviors of the suspensions drastically. Newtonian fluid behavior disappears as the fiber loading increases. A significant increase of the complex viscosity and storage modulus is observed, especially when the temperature increases to 50 °C and 75 °C. In-situ reaction between the amine-terminated functional groups on the silanized fibers and the resin, is justified by the FT-IR analysis and is responsible for the improved fiber dispersion and network formation. A decreased rheological percolation is observed after silanization due to the improved fiber dispersion quality. The electrical conductivity percolation is well correlated to the rheological percolation for the as-received fiber resin suspensions. However, with an insulating organic coating on the fiber surface, the conductivity increases slightly and lacks the correlation to the rheological percolation.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.