Abstract
Polymer hot-melt adhesives are obtained on the basis of poly(ethylene-vinyl acetate), polyethylene wax, and aromatic (C9) hydrocarbon resins differing in the degree of hydrogenation of aromatic groups (from 0 to 37%). The content of poly(ethylene-vinyl acetate) is varied from 30 to 80%, and the concentration of other components of the adhesive is within 10–35%. The rheology of adhesive components and blend compositions is studied in detail, and the adhesion characteristics of the adhesives are determined. It is found that the use of a nonhydrogenated resin leads to high adhesion properties of the adhesive but imparts viscoplasticity to it. The use of a hydrogenated resin provides better rheological properties of the adhesive, but a higher content of poly(ethylene-vinyl acetate) is required to achieve good adhesion characteristics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
