Rhamsan gum production by Sphingomonas sp. CGMCC 6833 using a two‐stage agitation speed control strategy

Abstract

Varying the agitation speed could greatly affect rhamsan gum production by Sphingomonas sp. CGMCC 6833. Batch fermentations at agitation speeds of 400, 600, 800, and 1,000rpm were therefore carried out. The time course of specific cell growth rate, specific glucose consumption rate, and specific rhamsan gum formation rate was subsequently determined. Based on the results, a novel two-stage agitation speed control strategy was developed. From 0 to 13H, the high specific cell growth and glucose consumption rates were achieved by setting the agitation speed of the fermenter at 800rpm. From 13H onward to the end of fermentation, the glucose consumption rate and specific cell growth rate were high at the agitation speed of 600rpm. Using this method, the maximum concentration and productivity of rhamsan gum reached 21.63±1.76gL(-1) and 0.338±0.028gL(-1) H(-1) , respectively, which were both higher than the optimum results obtained at constant agitation speeds.