Abstract
This paper presents the design concept and experimental results about small size radio frequency (RF) module for 5GHz wireless local area network (WLAN). Functions of the RF module include from base band input/output to antenna switch. The size is 20mm × 15mm × 3mm and that is minimum size in modules with same functions as far as the authors get to know. For the purpose of small size and low cost, generally known technologies are used. They are multi chip module on laminated-base dielectric substrate (MCM-L) technology, interconnection of each layer using build-up technology, flip chip technology and ball grid array (BGA) technology. Parts and ICs are on both sides of the RF module's substrate and are vertically connected in the substrate. In order to ensure electrical performance at 5GHz frequency band in the high-density package, transmission line characteristics in the substrate and BGA characteristic are simulated by 3 dimensional (3D) electromagnetic (EM) software. The fabricated RF module is evaluated using the test set up for 5GHz WLAN application and the result is shown.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.