Abstract
This paper presents an electrostatic RF microelectromechanical systems (MEMS) metal contact switch based on a tethered cantilever topology. The use of tethers results in a design that has low sensitivity to stress gradients, biaxial stresses, and temperature. A switch with a footprint of 160 × 190 μm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> and based on a 8-μm-thick gold cantilever with an Au/Ru contact is implemented on a high-resistivity silicon substrate and results in a total contact force of 0.8-1.2 mN at 80-90 V, a restoring force of 0.5 mN, a pull-in voltage of 61 V, an up-state capacitance of 24 fF, and an actuation time of 6.4 μ s. The device achieves a switch resistance of 2.4±1.4 Ω to 1.8±0.6 Ω at 90-100 V in open laboratory environments (nonpackaged). This design has the potential to replace conventional electromagnetic relays in application areas such as automated testing equipment and high-performance switching networks.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
