Abstract

Taking into account the nature of the hydrological processes involved in in situ measurement of Field Capacity (FC), this study proposes a variation of the definition of FC aiming not only at minimizing the inadequacies of its determination, but also at maintaining its original, practical meaning. Analysis of FC data for 22 Brazilian soils and additional FC data from the literature, all measured according to the proposed definition, which is based on a 48-h drainage time after infiltration by shallow ponding, indicates a weak dependency on the amount of infiltrated water, antecedent moisture level, soil morphology, and the level of the groundwater table, but a strong dependency on basic soil properties. The dependence on basic soil properties allowed determination of FC of the 22 soil profiles by pedotransfer functions (PTFs) using the input variables usually adopted in prediction of soil water retention. Among the input variables, soil moisture content θ (6 kPa) had the greatest impact. Indeed, a linear PTF based only on it resulted in an FC with a root mean squared residue less than 0.04 m³ m-3 for most soils individually. Such a PTF proved to be a better FC predictor than the traditional method of using moisture content at an arbitrary suction. Our FC data were compatible with an equivalent and broader USA database found in the literature, mainly for medium-texture soil samples. One reason for differences between FCs of the two data sets of fine-textured soils is due to their different drainage times. Thus, a standardized procedure for in situ determination of FC is recommended.

Highlights

  • Field capacity (FC) is a soil parameter that is widely used in soil hydrology, land management, and irrigation and drainage engineering

  • The data point scattering around the 1:1 line, given by Root mean squared residues (RMSRs), is partly due to spatial variability. θi is more scattered than Field Capacity (FC), which indicates greater similarity among FC values as compared to θi

  • For this conceptual framework to have practical significance and for FC to be determined as an intrinsic soil property, it is necessary that the dependence of FC on W and θi(z) be insignificant

Read more

Summary

Introduction

Field capacity (FC) is a soil parameter that is widely used in soil hydrology, land management, and irrigation and drainage engineering. Evapotranspiration is not mentioned in the original definition of Veihmeyer and Hendrickson either, nor is it recognized in the Glossary of Soil Science Another question is the presence of impeding or highly permeable layers and phreatic levels, as well as the influence of lateral flow in sloping landscapes. Assuming a deep wetting front in both homogeneous and layered profiles, Hillel & van Bavel (1976) and Hillel & Talpaz (1977) solved the drainage problem by applying a numerical solution to Richards equation, ignoring hysteresis and evapotranspiration They showed that after two days of drainage, the distribution of soil moisture was nearly uniform in the profile (homogeneous materials) or in each layer (layered materials). In layered soils, this distribution varied with the layering sequence, which indicates the importance of soil properties and profile morphology regarding FC

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call