Abstract

In the context of climate change and the depletion of fossil fuels, there is a great need for alternatives to petroleum in the transport sector. This review provides an overview of the production of second generation bioethanol, which is distinguished from the first generation and subsequent generations of biofuels by its use of lignocellulosic biomass as raw material. The structural components of the lignocellulosic biomass such as cellulose, hemicellulose and lignin, are presented along with technological unit steps including pretreatment, enzymatic hydrolysis, fermentation, distillation and dehydration. The purpose of the pretreatment step is to increase the surface area of carbohydrate available for enzymatic saccharification, while minimizing the content of inhibitors. Performing the enzymatic hydrolysis releases fermentable sugars, which are converted by microbial catalysts into ethanol. The hydrolysates obtained after the pretreatment and enzymatic hydrolysis contain a wide spectrum of sugars, predominantly glucose and xylose. Genetically engineered microorganisms are therefore needed to carry out co-fermentation. The excess of harmful inhibitors in the hydrolysate, such as weak organic acids, furan derivatives and phenol components, can be removed by detoxification before fermentation. Effective saccharification further requires using exogenous hemicellulases and cellulolytic enzymes. Conventional species of distiller's yeast are unable to ferment pentoses into ethanol, and only a very few natural microorganisms, including yeast species like Candida shehatae, Pichia (Scheffersomyces) stipitis, and Pachysolen tannophilus, metabolize xylose to ethanol. Enzymatic hydrolysis and fermentation can be performed in a number of ways: by separate saccharification and fermentation, simultaneous saccharification and fermentation or consolidated bioprocessing. Pentose-fermenting microorganisms can be obtained through genetic engineering, by introducing xylose-encoding genes into metabolism of a selected microorganism to optimize its use of xylose accumulated in the hydrolysate.

Highlights

  • Chief among the many challenges facing the modern world are the interconnected issues of global warming, reliance on fossil fuels, and food and energy security

  • This review provides a summary of the process for converting recalcitrant, lignocellulosic biomass components into renewable second generation liquid bioethanol

  • Lignocellulosic biomass from vegetable waste has a great potential for use in the production of bioethanol, but due to its complex structure, it requires pretreatment to improve the yield of reducing sugars in the hydrolysate during enzymatic hydrolysis from cellulose and hemicellulose

Read more

Summary

SUMMARY

In the context of climate change and the depletion of fossil fuels, there is a great need for alternatives to petroleum in the transport sector. The structural components of the lignocellulosic biomass such as cellulose, hemicellulose and lignin, are presented along with technological unit steps including pretreatment, enzymatic hydrolysis, fermentation, distillation and dehydration. The purpose of the pretreatment step is to increase the surface area of carbohydrate available for enzymatic saccharification, while minimizing the content of inhibitors. The hydrolysates obtained after the pretreatment and enzymatic hydrolysis contain a wide spectrum of sugars, predominantly glucose and xylose. Engineered microorganisms are needed to carry out co-fermentation. Conventional species of distiller’s yeast are unable to ferment pentoses into ethanol, and only a very few natural microorganisms, including yeast species like Candida shehatae, Pichia (Scheffersomyces) stipitis, and Pachysolen tannophilus, metabolize xylose to ethanol. Pentose-fermenting microorganisms can be obtained through genetic engineering, by introducing xylose-encoding genes into metabolism of a selected microorganism to optimize its use of xylose accumulated in the hydrolysate

INTRODUCTION
First generation bioethanol
Third generation bioethanol
Composition of lignocellulosic feedstock for bioethanol production
Conversion of biomass into ethanol
Types of pretreatment
Inhibitory compounds and their impact on microorganisms
Enzymatic hydrolysis
Fermentation of lignocellulosic hydrolysates
FERMENTATIVE MICROORGANISMS
Saccharomyces cerevisiae
Zymomonas mobilis
PENTOSE FERMENTATION AND XYLOSE METABOLISM
RECOMBINANT FERMENTATIVE MICROBES
NEW IMPROVEMENTS IN ETHANOL PRODUCTION FROM LIGNOCELLULOSIC BIOMASS
Findings
CONCLUSIONS
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call