Review of resource and recycling of silicon powder from diamond-wire sawing silicon waste

Abstract

The installed capacity of solar photovoltaic power generation has grown rapidly in the last decades. With the rapid development of the photovoltaic industry, the demand for Si wafers, which are integral to solar cells, has grown dramatically. In the manufacture of Si wafers, the traditional loose abrasive sawing method (LAS) has gradually been replaced by the diamond-wire sawing method (DWS). However, during the diamond-wire wafer sawing process, approximately 35%−40% of the crystalline Si becomes diamond-wire sawing silicon waste (DSSW). Therefore, DSSW represents a resource worth recycling due to its low levels of impurities and high silicon content. Furthermore, recycling prevents DSSW from becoming environmental pollution and eliminates disposal costs. This review provides an overview of the recycling and reutilization of DSSW based on an extensive literature survey. In view of the rapid increase in DSSW production and current purification bottleneck of < 5 N, in-situ utilizations may be more feasible, such as the preparation of silicon containing alloys and functional ceramic materials, which not only frees from the complex purification process, but has a huge demand. Finally, based on the review, future prospects are proposed, aiming to identify research directions with significant potential in the resource utilization of DSSW and other silicon wastes.