Review of Recent Developments in Tensile Properties of Engineered Geopolymer Composites

Abstract

Listen

Translate article

Engineered Cementitious Composite (ECC) is a type of highly ductile cementitious material. However, due to its characteristics of high energy consumption and high carbon emissions, it is necessary to seek a new type of low-carbon and environmentally friendly substitute. Engineered Geopolymer Composite (EGC), as a promising construction material for replacing ECC, has broad application prospects. Through visual analysis of the relevant literature in Web of Science, it was discovered that the research on EGC mainly concentrates on aspects such as the types of precursors, the chemical composition of the alkali-activated solution, and the related parameters of fibers. This paper mainly combines the relevant experimental research data on the tensile properties of EGC conducted by scholars at home and abroad, and focuses on analyzing the influence of precursor types, the chemical composition of the alkaline activator, and fibers on the tensile properties of EGC. The statistical results indicate that fly ash and ground granulated blast-furnace slag (GGBFS) are the most commonly used precursor materials. Replacing an appropriate amount of fly ash in the precursor with GGBFS can significantly enhance the tensile strength of EGC. The type of alkaline activator and its molarity have a relatively obvious influence on the tensile properties of EGC. An increase in the molarity of NaOH within a certain range can enhance the tensile strength of EGC. Furthermore, the incorporation of fibers, especially synthetic fibers such as polypropylene (PP) and polyvinyl alcohol (PVA) fibers, as well as inorganic fibers such as glass fibers (GF) and carbon fibers (CF), can effectively enhance the tensile strength and tensile strain capacity of EGC. The use of hybrid fibers may further improve the tensile properties.