Review of Pervaporation and Vapor Permeation Process Factors Affecting the Removal of Water from Industrial Solvents.

Abstract

A recent review article (J Chem Technol Biotechnol 94: 343-365 (2019)) identified several commercially-available permselective materials for drying organic solvents with pervaporation (PV) and vapor permeation (V·P) separation processes. The membrane materials included polymeric and inorganic substances exhibiting a range in the performance characteristics: water permeance, water/solvent selectivity, and maximum use temperature. This paper provides an overview of the factors affecting the design of PV/V·P processes utilizing these membranes to remove water from common organic solvents. Properties of the specific membrane and of the solvent substantially affect the PV/V·P separation. Equally important is the impact of operating parameters on the overall separation. To study these impacts, simplified process performance equations and detailed spreadsheet calculations were developed for single-pass and recirculating batch PV systems and for single-pass V·P systems. Estimates of membrane area, permeate concentration, solvent recovery, permeate condenser temperatures, and heating requirements were calculated. Process variables included: solvent type, water permeance, water/solvent selectivity, initial and final water concentrations, operating temperature (PV) or feed pressure (V·P), temperature drop due to evaporation (PV) or feed-side pressure drop (V·P), and permeate pressure. The target solvents considered were: acetonitrile, 1-butanol, N,N-dimethyl formamide, ethanol, methanol, methyl isobutyl ketone, methyl tert-butyl ether, tetrahydrofuran, acetone, and 2-propanol.