REVIEW: MATERIALS FOR IMPREGNATION OF POROUS METALLIZATION THERMAL SPRAYED ANTICORROSIVE COATINGS OF SUBMERSIBLEOILFIELD EQUIPMENT. Part 1

Abstract

Submersible oilfield equipment undergoes aggressive corrosive effects of petroleum fluid, abrasive effects of mechanical impurities during operation, and also operates at elevated temperatures in the bottom. The most effective way to protect the outer surface of oilfield equipment is the use of metallization thermal sprayed coatings, and therefore the application of thermal spraying technology is becoming more and more in demand.However, the formation of a coating structure from many particles of molten material, due to their spraying, incomplete melting and loose packaging, leads to the formation of porosity, and porosity is one of the main disadvantages of thermal sprayed coatings. To eliminate this disadvantage, it is possible to use impregnation of porous coatings with various compositions, in which case the coating becomes composite. Depending on the operating environment, temperature conditions and operating conditions, metal, organic and inorganic impregnating compositions are used,but their use in the oil environment has been little studied, therefore the development of composite impregnated coatings is relevant for the protection of submersible oilfield equipment. The article highlights the influence of technological modes of its application on the porosity of thermal sprayed coating and the quality of substrate surface preparation. The main methods of sealing the porosity of thermal sprayed coatings by impregnation are described. The mechanism of impregnation (infiltration) of porous coatings, used methods of application and their classification are described, the determining role of wetting the coating with an impregnating material is emphasized. The effect of the rough surface of a thermal sprayed coating is shown, which consists in enhancing the wetting properties of the impregnating composition, the influence of roughness on the formation of adhesive bonds between the coating and the impregnating composition.The review presents traditional impregnating materials used in industry and their application modes.The application of metal and non-polymer inorganic impregnating compounds, represented mainly by salts of inorganic acids (nitrates, phosphates, silicates), is described. Specific test results are presented, including for the corrosion and abrasive resistance of thermal sprayed coatings after the application of impregnating compounds.