Abstract
The use of concentrated brines and brackish water as feed solutions in reverse electrodialysis represents a valuable alternative to the use of river/sea water, allowing the enhancement of power output through the increase of driving force and reduction of internal stack resistance. Apart from a number of theoretical works, very few experimental investigations have been performed so far to explore this possibility.In the present work, two RED units of different size were tested using artificial saline solutions. The effects of feed concentration, temperature and flowrate on process performance parameters were analysed, adopting two different sets of membranes. These experiments allowed to identify the most favourable conditions for maximising the power output within the presently investigated range, i.e. 0.1M NaCl as diluate and 5M NaCl as concentrate at 40°C. Under these conditions a power density equal to 12W/m2cell_pair was reached, among the highest so far reported in the literature. Increasing the unit size a slight reduction in power density was observed. These results indicate new directions for a successful scale-up and development of the Reverse Electrodialysis technology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
