Reverberation room design optimisation for low-frequency diffuse sound absorption testing

Abstract

The reproducibility of sound absorption testing with the reverberation room method is a long-standing concern. Absorptive samples induce directionality in the nearfield, while the farfield depends on the room geometry below the Schroeder frequency. Nevertheless, when properly accounting for nearfield effects, the theoretical diffuse absorption coefficient of a sample still represents its average performance across an ensemble of different rooms, even at very low frequencies. Recent research found that particular reverberation room designs allow for an accurate measurement of the diffuse sound absorption coefficient of highly absorptive samples at low frequencies. Pinpointing such designs hence opens up a possibility to sustainably improve the low-frequency reproducibility of sound absorption testing in reverberation rooms. The present paper introduces a numerical optimisation framework that serves this purpose. Specific room shapes are parametrised and the geometrical room parameters are optimised so as to minimise the difference between the measured and the diffuse absorption coefficient under appropriate constraints. The sound absorption testing of a sample in a particular reverberation room is numerically simulated using a method that is both accurate and computationally efficient at low frequencies. The diffuse absorption is computed with a hybrid deterministic-statistical energy analysis approach that accounts for the detailed absorber properties, geometry, and boundary conditions, as well as the nearfield effects. The methodology is applied to both cuboidal and hexahedral room shapes. Certain optimised designs are found not only to provide an excellent match for the absorber that was used during the optimisation, but they also maintain their performance across a range of absorptive samples. Additionally, potential geometrical deviations are found to be well tolerated by these reverberation room designs.