Abstract
Due to the influence of mass law, traditional lightweight sandwich structures have struggled to surpass solid structures in sound insulation performance. To this end, we propose an acoustic metamaterial structure with a sandwich configuration based on the re-entrant negative Poisson's ratio (NPR) structure and systematically investigate its sound transmission loss (STL) performance under incident plane wave conditions. We used the acoustic impedance tube method to experimentally study the sound insulation performance of the re-entrant NPR sandwich structure under free boundary conditions, and then established an acoustic analysis simulation model based on COMSOL Multiphysics software, which verified that the results obtained by the experiment and the numerical simulation were in good agreement. The results show that the sandwich structure exhibits excellent sound transmission loss performance in the studied frequency range (250-4000 Hz), and the overall sound insulation performance exceeds the curve of the mass theorem, basically achieving more than 20 dB when the sandwich thickness is 2 cm. Finally, we conduct parametric studies to establish a correlation between the geometric design of NPR sandwich structures and their sound transmission loss performance. The research shows that the changes of the length of the ribs, the distance from the ribs to the center of the unit, and the length of the upper wall and the lower wall have a significant impact on the sound insulation performance of the re-entrant NPR sandwich structure, while the change of the wall thickness basically will not affect the sound insulation performance of the sandwich structure. This research can provide practical ideas for the engineering application of noise suppression designs of lightweight structures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.