Abstract

Identifying changes in coal permeability with gas pressure and accurately codifying mean effective stresses in laboratory samples are crucial in predicting gas-flow behavior in coal reservoirs. Traditionally, coal permeability to gas is assessed using the steady-state method, where the equivalent gas pressure in the coal is indexed to the average of upstream and downstream pressures of the coal, while ignoring the nonlinear gas pressure gradient along the gas flow path. For the flow of a compressible gas, the traditional method consistently underestimates the length/volume-averaged pressure and overestimates mean effective stress. The higher the pressure differential within the sample, the greater the error between the true mean pressure for a compressible fluid and that assumed as the average between upstream and downstream pressures under typical reservoir conditions. A correction coefficient for the compressible fluid pressure asymptotes to approximately 1.3%, representing that the error in mean pressure and effective stress can be on the order of approximately 30%, particularly for highly pressure-sensitive permeabilities and compressibilities, further amplifying errors in evaluated reservoir properties. We utilized this volume-averaged pressure and effective stress to correct permeability and compressibility data reported in the literature. Both the corrected initial permeability and the corrected pore compressibility were found to be smaller than the uncorrected values, due to the underestimation of the true mean fluid pressure, resulting in an overestimation of reservoir permeability if not corrected. The correction coefficient for the initial permeability ranges from 0.6 to 0.1 (reservoir values are only approximately 40% to 90% of laboratory values), while the correction coefficient for pore compressibility remains at approximately 0.75 (reservoir values are only approximately 25% of laboratory value). Errors between the uncorrected and corrected parameters are quantified under various factors, such as confining pressure, gas sorption, and temperature. By analyzing the evolutions of the initial permeability and pore compressibility, the coupling mechanisms of mechanical compression, adsorption swelling, and thermal expansion on the pore structure of the coal can be interpreted. These findings can provide insights that are useful for assessing the sensitivity of coal permeability to gas pressure as truly representative of reservoir conditions.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call