Reusable Solid-Phase Microextraction Coating for Direct Immersion Whole-Blood Analysis and Extracted Blood Spot Sampling Coupled with Liquid Chromatography–Tandem Mass Spectrometry and Direct Analysis in Real Time–Tandem Mass Spectrometry

Abstract

Three different biocompatible polymers were tested and evaluated in order to improve the whole-blood biocompatibility of previously developed C18-polyacrylonitrile (C18-PAN) thin-film solid-phase microextraction (SPME) coating. Among all methods of modification, UV-dried thin PAN-over C18-PAN provided the best results. This coating presented reusable properties and reproducible extraction efficiency for at least 30 direct extractions of diazepam from whole blood [relative standard deviation (RSD) = 12% using external calibration and 4% using isotope dilution calibration]. The amount of absolute recovery for direct immersion analysis and based on the free concentration of diazepam in blood matrix was about 4.8% (desorption efficiency = 98%). The limit of quantitation (LOQ) for the developed solid-phase microextraction liquid chromatography-tandem mass spectrometry (SPME-LC-MS/MS) method for direct whole-blood analysis was 0.5 ng/mL. The optimized modification of the coating was then used for an extracted blood spot (EBS) sampling approach, a new sampling method which is introduced to address the limitations of dried blood spot sampling. EBS was evaluated using LC-MS/MS and direct analysis in real time (DART)-MS/MS, where, for a 5 μL blood spot, LOQs of 0.2 and 1 μg/mL, respectively, were achieved for extraction of diazepam.