Reusable piezoelectric transducer for structural health monitoring using both Lamb wave and electromechanical impedance modes

Abstract

A variety of structural health monitoring techniques have been developed to support the efficient online monitoring of structural integrity. Moreover, Lamb wave and electromechanical impedance methods are increasingly used for structural health monitoring applications due to their high sensitivity and effectiveness in detecting damage. However, these techniques require transducers to be permanently attached to structures because of the usage of baselines recorded under the condition without damage. In this study, a reusable piezoelectric lead zirconate titanate transducer for monitoring corrosion damage on the aluminum plate is introduced, which can be removed from the test specimen and reused with the repeatability of signals. The reusable piezoelectric lead zirconate titanate transducer is bonded on the aluminum plate using the ethylene-acrylic acid copolymer with an aluminum enclosure. A series of experiments are conducted on an aluminum plate, including the investigation for repeatability of signals and the capability of corrosion detection of the designed piezoelectric lead zirconate titanate transducer through the Lamb wave and electromechanical impedance methods. The simulated corrosion defect with the area of 15 × 15 mm2 is detected during experiments. The experimental results confirm that the reusable piezoelectric lead zirconate titanate transducer can effectively evaluate the corrosion damage to plate structure and can be reused many times.