Abstract

BackgroundThere is an urgent need for accurate and rapid diagnostic tests to identify carbapenemase producing enterobacteria (CPE). Here, we have evaluated the Carbapenem Inactivation Method (CIM) test to detect CPEs from cultured colonies.MethodsA total of 256 enterobacterial isolates were used to evaluate the performance of the CIM in comparison to Carba NP test and molecular detection used a reference method. Ninety three well-characterized isolates (including 29 non-CPE and 63 CPEs of worldwide origin) with decreased susceptibility to at least one carbapenem were used to (i) evaluate the efficacy of CIM test and (ii) to compare it to the Carba NP test. We also tested different carbapenems to determine the best substrate for this test. Finally, the CIM test was then evaluated prospectively against 164 isolates referred to the French National Reference Center (NRC) for Antimicrobial Resistance from may 2016 to july 2016.ResultsBased on the results of this retrospective study, sensitivity and specificity of the CIM and the Carba NP test were 92.1% and 100%, respectively. We demonstrated that the meropenem was the best substrate to perform the CIM test since sensitivity and specificity were 81.1% and 100% using ertapenem disk, and 100% and 65,6% using imipenem disk, and respectively. Taking in account the results of retrospective and prospective studies, CIM and Carba NP tests have similar sensitivity, specificity, positive predictive value and negative predictive values being 96.3%, 98.9%, 99.0% and 98.4% for the CIM test versus 96.9%, 100%, 100% and 100% for the Carba NP test.ConclusionsOur results confirm that the CIM test may be a useful tool for the reliable confirmation of carbapenemase-activity in enterobacterial isolates, especially in clinical microbiological laboratories with limited resources, no trained personnel, and no specialized equipment.

Highlights

  • Carbapenemase producers are increasingly reported worldwide in Enterobacteriaceae [1]

  • A total of 256 enterobacterial isolates were used to evaluate the performance of the Carbapenem Inactivation Method (CIM) in comparison to Carba NP test and molecular detection used a reference method

  • We demonstrated that the meropenem was the best substrate to perform the CIM test since sensitivity and specificity were 81.1% and 100% using ertapenem disk, and 100% and 65,6% using imipenem disk, and respectively

Read more

Summary

Introduction

Carbapenemase producers are increasingly reported worldwide in Enterobacteriaceae [1] They are most often resistant to many classes of antimicrobial molecules, and represent a major public health concern. The phenotypic confirmation tests for detecting carbapenemases include inhibition tests of carbapenemase activity [4], detection of carbapenem hydrolysis using MALDI-TOF MS [5], biochemical tests (e.g. Carba NP Test and derivatives) [6,7,8] or electrochemical measurement (BYG test; [9]). These tests are able to detect the presence of a carbapenemase activity and sometimes to discriminate between Ambler class A and Ambler class B carbapenemases (e.g inhibition tests and Carba NP test II; [10]). We have evaluated the Carbapenem Inactivation Method (CIM) test to detect CPEs from cultured colonies.

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call