Abstract

This paper presents an assessment on the use of dynamic compaction as a ground improvement technique in a port’s hydraulic fill in the new southern dock of Sagunto’s Harbor near Valencia (Spain). Soil behavior improvement was monitored by several in situ techniques such as boreholes with SPTs, DPSH, CPTU and CSWS geophysical tests. A total energy between 2188 and 3125 kN/m2 (depending the area) was applied to the hydraulic fill by the dynamic compaction procedure. In situ techniques led to evaluate dynamic compaction efficiency, as well as controlling ground modifications that might cause potential damages to adjacent buildings. The dynamic compaction carried out was capable of fulfilling requirements established to use the area, that is, an average deformability modulus (E′) of 30 MPa with a minimum of 20 MPa, in a depth of 10 m. Moreover, dynamic compaction increased hydraulic fill relative density by about 75%.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call