RETRACTED: Intelligent cooling water control for a medical accelerator by application of fast feed-forward for future

Abstract

Abstract An 8-MeV linear proton medical accelerator designed with a high RF duty operation is being developed at Ibaraki Neutron Medical Research Center for iBNCT (Ibaraki - Boron Neutron Capture Therapy). The reliability and stability of the cooling water control system has become one of the most important issues in realizing the medical application of the accelerator, which is designed considering high performance and low costs. However the previous cooling water control system with a commercial PID (Proportional–Integral–Differential) controller could not meet the operation requirements of the medical accelerator. Therefore, a new intelligent cooling water controller is successfully developed by application of Fast Feed-forward for Future (FFF). The detailed design of the intelligent cooling water control system and its great efficacy in improving accelerator operation is described in this paper. The stability of the cooling water temperature is improved greatly from the previous ± 0 . 30 ° C to the current ± 0 . 03 ° C. Moreover, the response time of cooling water control is decreased dramatically from the previous 5 min to approximately 20 s. Precise operation and an excellent auto-tuning of the RFQ (Radio Frequency Quadrupole LINAC) cavity are realized by using this stable and intelligent water control system. The beam transmittance is also improved slightly after a fine scan experiment with different settings of RF devices under stable acceleration operation. Finally, the RF startup time is also reduced by using this intelligent cooling water control system. Now the iBNCT accelerator operation is greatly improved with a very high reliability and stability. The accelerator will be operated as a practical medical therapy in late 2019. The technology developed in this intelligent cooling water control system will be very useful for the development of similar accelerators with high performance and low cost.