Abstract

BackgroundLignin is a potential feedstock for microbial conversion into various chemicals. However, the degradation rate of native or technical lignin is low, and depolymerization is needed to obtain reasonable conversion rates. In the current study, base-catalyzed depolymerization—using NaOH (5 wt%)—of softwood Kraft lignin was conducted in a continuous-flow reactor system at temperatures in the range 190–240 °C and residence times of 1 or 2 min. The ability of growth of nine bacterial strains belonging to the genera Pseudomonas and Rhodococcus was tested using the alkaline-treated lignin as a sole carbon source.ResultsPseudomonas fluorescens and Rhodococcus opacus showed the best growth of the tested species on plates with lignin. Further evaluation of P. fluorescens and R. opacus was made in liquid cultivations with depolymerized lignin (DL) at a concentration of 1 g/L. Size exclusion chromatography (SEC) showed that R. opacus consumed most of the available lower molecular weight compounds (approximately 0.1–0.4 kDa) in the DL, but the weight distribution of larger fractions was almost unaffected. Importantly, the consumed compounds included guaiacol—one of the main monomers in the DL. SEC analysis of P. fluorescens culture broth, in contrast, did not show a large conversion of low molecular weight compounds, and guaiacol remained unconsumed. However, a significant shift in molecular weight distribution towards lower average weights was seen.ConclusionsRhodococcus opacus and P. fluorescens were identified as two potential microbial candidates for the conversion/consumption of base-catalyzed depolymerized lignin, acting on low and high molecular weight lignin fragments, respectively. These findings will be of relevance for designing bioconversion of softwood Kraft lignin.

Highlights

  • Lignin is a potential feedstock for microbial conversion into various chemicals

  • We explore the possibilities of utilizing depolymerized softwood Kraft lignin (Indulin AT) as a substrate for bacterial conversion

  • Characterization of depolymerized lignin streams produced at different temperatures and residence times The molecular weight distribution (MWD) of the depolymerized Kraft lignin as assessed by Size exclusion chromatography (SEC) was in good agreement with previously reported measurements by Abdelaziz et al [28]

Read more

Summary

Introduction

Lignin is a potential feedstock for microbial conversion into various chemicals. the degrada‐ tion rate of native or technical lignin is low, and depolymerization is needed to obtain reasonable conversion rates. The lignin biopolymer is built from phenyl propanoid units which are substituted at different positions and connected together by ether and C–C cross-links/bonds [8, 9]. It should be noted in this context that the relative contribution of these building blocks is very different between different types of biomass [10]. There are different techniques for the separation of lignin from lignocellulosic biomass and the resultant lignin vary in terms of bond structures, building block composition, added functional groups, and molecular weight distribution depending on the separation process. The term “lignin” is per se not very descriptive

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call