Abstract
Eucalyptus harvesting, forwarding and soil tillage operations are among the main causes for compaction of forest soils, with potential impacts on productivity. This concern is especially important in areas with soils that are naturally compacted (fragipans and duripans). In these soils, tillage operations include the use of subsoilers that can reach depths of more than one meter and require heavy tractors that exert high pressure on the soil. One of the ways to try to minimize the effect of this compaction is by retaining harvest residues. The objective of this study was to evaluate the impacts of eucalyptus harvesting on soil physical attributes, as well as to determine the potential of different types of residue management to reduce compaction from the soil tillage operation. Two experiments were conducted in the same area with a Yellow Argisol. In the first experiment, compaction caused by mechanized harvesting with harvester + forwarder was evaluated. In the second experiment, different managements of harvest residues were examined as potential modifiers of soil compaction during tillage for new plantings. For this, three managements systems were tested: (1) retention of all harvest residues and litter from the previous rotation (HR + L), (2) retention of litter from the previous rotation (L), and (3) removal of harvest residues and litter from the previous rotation (WR). Before and after harvest, sampling was carried out in the planting rows and inter-rows, and after tillage, samples were collected in the traffic line of the subsoiler-tractor set. In both experiments, undisturbed soil samples were collected from the center of the 0–10, 10–20, 20–40, 40–60, and 60–100 cm layers to determine soil density and total porosity. In each period and site of evaluation, mechanical resistance to penetration up to the 60-cm depth was also determined. The harvesting operation increased soil density at 0–10 and 60–100 cm depths only in the inter-rows. Retention of harvest residues and litter (HR + L) after harvesting avoided increases in soil density and penetration resistance caused by machine traffic during tillage. The results indicate the importance of retaining harvest residues on forest soils for achieving sustainable utilization and for conserving soil quality.
Highlights
Brazil has the largest area planted with eucalyptus in the world, approximately 7.5 × 1 06 ha (IBGE 2019), in addition to having one of the highest average productivities, 36 m 3 ha−1 (IBÁ 2019)
Studies have indicated the effectiveness of deep subsoiling in commercial eucalyptus plantations on cohesive soils in the region of Entre Rios, Bahia, with greater initial growth of seedlings compared to the use of holes for planting (Stape et al 2002)
This study evaluates the impact of eucalyptus harvesting on soil physical attributes and whether the retention of harvesting residues effectively lessens compaction caused during soil tillage at great depths
Summary
Brazil has the largest area planted with eucalyptus in the world, approximately 7.5 × 1 06 ha (IBGE 2019), in addition to having one of the highest average productivities, 36 m 3 ha−1 (IBÁ 2019). An important part of the eucalyptus stands in Brazil is located in the region of the Coastal Tablelands, concentrated mainly in the states of Espírito Santo and Bahia. Studies have indicated the effectiveness of deep subsoiling in commercial eucalyptus plantations on cohesive soils in the region of Entre Rios, Bahia, with greater initial growth of seedlings compared to the use of holes for planting (Stape et al 2002). It can be efficient as a form of soil tillage, subsoiling at great depths requires robust and heavy machines with high traction power. Compaction reduces aeration and hydraulic conductivity and increases resistance to root system development (Tracy et al 2011), which can limit the absorption of water and nutrients, negatively affecting productivity (Luciano et al 2012)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.