Abstract
Graphene oxide (GO) has recently been proposed as one of the potential resistive switching materials for future nonvolatile memory applications. In this work, we present a flexible resistive memory device with the structure of aluminium (Al)/GO/ indium tin oxide (ITO) fabricated at room temperature. The Al/GO/ITO devices show unipolar resistive switching behaviour with resistance ratio to over 30, and SET and RESET voltages for 5 V and 3 V, respectively. In addition, the Al/GO/ITO flexible memory can sustain over 250 cycling without any resistance window closure. However, the retention failures after 5000 s were observed owing to the sharp resistance increase of LRS, which is first observed in GO based resistive memory. The retention behaviour is examined intensively through various READ operations, including changing read interval time, read voltage and environment temperature. Supported by the results of these electrical measurements, it has been proved that NEM (Nano-Electromechanical) effects are responsible for the resistive switching and retention failure. The stacked GO flakes in the film joined to each other due to the electrostatic attraction and lead the device to LRS while separated by voltage-induced break and drive the device to HRS. Therefore, short read interval time, large read voltage and high temperature can help hold LRS resistance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
