Results of the early orbit manoeuvres of the ampte-uks

Abstract

The Active Magnetospheric Particle Tracer Explorers (AMPTE) program consists of three satellites which were launched on 16th August 1984. The scientific aim of the mission is to inject lithium and barium tracer ions inside and outside the Earth's magnetosphere and to detect and monitor these ions as they diffuse through the inner magnetosphere. The first of these three satellites, the U.S. Charge Composition Explorer (CCE) was launched into an elliptical orbit of apogee 8 R e . The other two satellites are the West German Ion Release Module (IRM) and the U.K. Subsatellite (UKS), both of which were launched on the same vehicle into a highly elliptical orbit of apogee 18 R e . At discreet intervals during the mission the IRM will release ions into the solar wind, and the movement of these ions will be monitored by the UKS. Depending on the particular scientific requirement, the UKS has to be positioned accurately at a given distance behind the IRM. Initially the UKS has to be located 100 km behind the IRM, and held there for ∼9 months. It will then be moved a distance of ∼1 R e behind the IRM. In order to manoeuvre the UKS around its orbit, a cold gas jet system is incorporated on the satellite, allowing impulses to be applied both along and perpendicular to the orbit velocity vector. The orbit control system also has to cater for relative orbit changes due to air drag at perigee, as the IRM and the UKS have different area mass ratios. This paper presents an account of the orbit control system implemented on the UKS, together with the mathematical approach adopted, and results from manoeuvres made in the first weeks of the mission.