Resultant Force of Lateral Earth Pressure in Unstable Slopes

Abstract

Traditionally, resultant force of lateral earth pressure serves as the basis for design of nearly vertical walls. Conversely, slopes are designed to be internally stable using a factor of safety approach. However, with the availability of heavy facing elements such as gabions, steep slopes are increasingly being constructed. Steep slopes are considered to be unstable unless supported; that is, such slopes require facings to resist lateral earth pressure. Extending Coulomb's formulation to such slopes may not be conservative as a planar slip surface may not be critical. Presented are the results of a formulation to find the resultant lateral force which utilizes a log spiral failure mechanism. Unlike Caquot and Kerisel or Coulomb, the soil-facing interface friction is assumed to act on segments of vertical surface only, thus replicating the geometry of stacked rectangular facing units. Given the batter, the backslope, the height, the interface friction, and the unit weight and design friction angle of the backfill, one can quickly determine the corresponding lateral earth pressure coefficient. Formulation assuming the interface friction is acting on an imaginary surface inclined at the batter angle, essentially equivalent to Coulomb and Caquot and Kerisel, is also presented. Its results show that for batters up to 20°, the common approach of using the Coulomb method, including the assumed interface friction direction to coincide with the batter, yields results that are quite close to those stemming from the log spiral analysis. Hence, use of Coulomb's analysis for such small batters is reasonable as its formulation is simple. However, the lateral resultant is grossly underestimated for larger batters, especially when Coulomb analysis is used.