Restructuring and redistribution of actinides in Am-MOX fuel during the first 24h of irradiation

Abstract

Abstract In order to confirm the effect of minor actinide additions on the irradiation behavior of MOX fuel pellets, 3 wt.% and 5 wt.% americium-containing MOX (Am-MOX) fuels were irradiated for 10 min at 43 kW/m and for 24 h at 45 kW/m in the experimental fast reactor Joyo. Two nominal values of the fuel pellet oxygen-to-metal ratio (O/M), 1.95 and 1.98, were used as a test parameter. Emphasis was placed on the behavior of restructuring and redistribution of actinides which directly affect the fuel performance and the fuel design for fast reactors. Microstructural evolutions in the fuels were observed by optical microscopy and the redistribution of constituent elements was determined by EPMA using false color X-ray mapping and quantitative point analyses. The ceramography results showed that structural changes occurred quickly in the initial stage of irradiation. Restructuring of the fuel from middle to upper axial positions developed and was almost completed after the 24-h irradiation. No sign of fuel melting was found in any of the specimens. The EPMA results revealed that Am as well as Pu migrated radially up the temperature gradient to the center of the fuel pellet. The increase in Am concentration on approaching the edge of the central void and its maximum value were higher than those of Pu after the 10-min irradiation and the difference was more pronounced after the 24-h irradiation. The increment of the Am and Pu concentrations due to redistribution increased with increasing central void size. In all of the specimens examined, the extent of redistribution of Am and Pu was higher in the fuel of O/M ratio of 1.98 than in that of 1.95.