Abstract
Recently, a remarkable scientific interest in the inhalation therapy for respiratory disease was spiked attributed to the growing prevalence of asthma, chronic obstructive pulmonary disease (COPD), and coronavirus disease 2019 (COVID-19) pandemic. A pressurized metered-dose inhaler (pMDI) is the best option by providing fast and efficient symptomatic relief within the lung. However, the rapid development of new inhalation devices could be critical in this competitive environment, and optimizing the inhalation devices could be costly and time-consuming. Therefore, the computational fluid dynamic (CFD) approach was used to shorten the development time. In this study, response surface methodology (RSM) in ANSYS version 19.2 was introduced to discover the optimal design for the actuator nozzle to increase the performance of pMDI. Three (3) parameters (orifice diameter, length, and actuator angle) were optimized, and the best design was selected according to the analysis of particle tracking. The analysis of spray plume was also conducted and compared to analyze the spray plume characteristic produced by three designs. The result showed that RSM generated three (3) models for the new design of the actuator nozzle (Design A, Design B, and Design C). Among three (3) designs, actuator nozzle design C showed the highest injection particle number (232457) and the only one that produced maximum particles velocity magnitude in the acceptable ranges (35.67m/s). All three designs showed a similar pattern as maximum particle velocity magnitude decreased along the axial length until they match the air velocity (0.03-0.04 m/s). Furthermore, the spray plume length, angle, and width were observed to increase linearly with the decreasing maximum particle velocity magnitude. Thus, this study suggested that design C might have the potential as a new actuator nozzle to develop future pMDI to relieve the respiratory condition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
