Abstract
<p>The aim of this study was to evaluate the mercury removal from aqueous solutions by using L-Cysteine functionalized Multi-walled Carbon Nanotubes. The effect of pH, adsorbent dose, contact time and mercury concentration in removal efficiency was evaluated. Multi -walled carbon nanotubes were functionalized with L-cysteine. The Response Surface Methodology (RSM) was used to find the optimum process parameters. The results showed that an increase in contact time, pH and adsorbent dosage resulted in an increase of the adsorption rate. However, removal efficiency decreases by increasing mercury concentration. The highest and lowest removal efficiencies of mercury were 89% and 17%, respectively. The maximum adsorption rate was occurring at 120 min. It is concluded that L-Cysteine functionalized multi-walled carbon nanotubes is an effective adsorbent for removal from aqueous solutions.</p>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.