Abstract
Biosorption process is considered as economical treatment to remove metal from the aqueous solution compared to other established methods. In this study, Saccharomyces cerevisiae was used as biosorbent and subject to immobilization process which consists of ethanol treatment for the removal of binary metals, lead (II) and nickel (II) from aqueous solution. Response surface methodology (RSM) was used to optimize effective parameters condition and the interaction of two or more parameters in order to obtain high removal of the binary metals. The parameters that have been studied were initial concentration of binary metals solution (10 - 60 mg/L), biosorbent dosage (0.2 - 1.0 g), pH (pH 2 - pH 6) and contact time (30 - 360 minutes) towards lead (II) and nickel (II) ions removal. Based on analysis of variance (ANOVA), biosorbent dosage, solution pH and contact time factor were found significant for both responses. Through optimization procedure, the optimum condition for lead (II) and nickel (II) ions removal were obtained at initial concentration of 10.0 mg/L, biosorbent dosage of 1.0 g, solution pH of pH 6, and contact time of 360.00 minutes, which resulted in 95.08 % and 21.09 % removal of lead (II) and nickel (II) ions respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
