Abstract
ABSTRACTSputtered deposited titanium films on silicon substrates were used to study the effects of first rapid thermal anneal temperature, duration of anneal time and thickness of the titanium films for TiSi2 formation. A central composite, coupled with a cross design was used to analyze response surface. Empirical models were developed and contour plots were generated to describe the outcome of the first anneal. A window of operation to control the process of titanium silicide formation was recommended. Response surface analysis of data revealed an operating window of ±10° C for RTA1 for stable TiSi2 formation. Within this window of operation, the within wafer uniformity was found to be at its minimum. Anneal time was found to have minimum effect on the variability although sheet resistance decreases monotonically with increasing anneal time. Thickness of titanium films were found to be very critical in determining final TiSi2 thickness as determined by RBS and/or XRF techniques.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
