Abstract
Waste cooking oil is a sustainable feedstock that can be utilised to produce biojet fuel via the hydrodeoxygenation process. However, the need for hydrogen for the hydrodeoxygenation process incurs high cost. In the present work, a type of bimetallic catalyst that can deoxygenate and selectively crack free fatty acids under hydrogen-free conditions was developed. The NiCo/TiO2 catalyst was prepared via the impregnation of varying amounts of Ni and Co salts onto TiO2. Optimisation of the production conditions was performed via response surface methodology based on the Box-Behnken experimental design to maximise the deoxygenation and biojet fuel yield. A maximum deoxygenation yield of 83.13 % with 44.5 % biojet fuel selectivity was obtained from the experiment and optimisation based on Box-Behnken design (R2 > 0.9). Incorporation of Ni and Co onto TiO2 reduced the surface area of the catalyst, but active metal dispersion significantly improved the deoxygenation performance and biojet fuel selectivity. The viscosity, flash point, freezing point and net heat of combustion value of the liquid product were within the jet fuel standard specifications. Overall, the study shows the potential of bimetallic NiCo/TiO2 catalyst in waste cooking oil deoxygenation for biojet fuel production.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
