Abstract
Displacement measurement in atomic force microscopy (AFM) is most commonly obtained indirectly by measuring the slope of the AFM probe and applying a calibration factor. Static calibration techniques operate on the assumption that the probe response approximates single mode behavior. For off-resonance excitation or different operating conditions the contribution of higher modes may become significant. In this paper, changes to the calibrated slope-displacement relationship and the corresponding implications on measurement accuracy are investigated. A model is developed and numerical simulations are performed to examine the effect of laser spot position, tip mass, quality factor and excitation frequency on measurement accuracy. Free response conditions and operation under nonlinear tip-sample forces are considered. Results are verified experimentally using a representative macroscale system. A laser spot positioned at a nominal position between x = 0.5 and 0.6 is determined to minimize optical lever measurement error under conditions where the response is dominated by contributions from the first two modes, due to excitation as well as other factors.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Dynamic Systems, Measurement, and Control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
