Abstract
This paper highlights recent developments in resonant optical devices for infrared (IR) and mid-infrared (mid- IR) lasers. Sub-wavelength grating based resonant optical filters are introduced and their application in 2 μm thulium fiber laser and amplifier systems has been discussed. The paper focuses on applying such filtering techniques to 2.8 μm mid-IR fiber laser systems. A narrowband mid-IR Guided-Mode Resonance Filter (GMRF) was designed and fabricated using Hafnium(IV) Oxide film/quartz wafer material system. The fabricated GMRF was then integrated into an Erbium (Er)-doped Zr-Ba-La-Al-Na (ZBLAN) fluoride glass fiber laser as a wavelength selective feedback element. The laser operated at 2782 nm with a linewidth less than 2 nm demonstrating the viability of GMRF’s for wavelength selection in the mid-IR. Furthermore, a GMRF of narrower linewidth based on Aluminum Oxide/quartz wafer material system is fabricated and tested in the same setup. The potentials and challenges with GMRFs will be discussed and summarized.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.