Resonance of the thermal boundary layer adjacent to an isothermally heated vertical surface

Abstract

AbstractThe instability characteristics and resonance of a natural convection boundary layer adjacent to an isothermally heated vertical surface are investigated using direct stability analyses. The detailed streamwise evolution of the boundary-layer frequencies is visualized via the power spectra of the temperature time series in the thermal boundary layer. It is found that the entire thermal boundary layer may be divided into three distinct regions according to the frequency profile, which include an upstream low-frequency region, a transitional region (with both low- and high-frequency bands) and a downstream high-frequency region. The high-frequency band in the downstream region determines the resonance characteristics of the thermal boundary layer, which can be triggered by a single-mode perturbation at frequencies within the high-frequency band. The single-mode perturbation experiments further reveal that the maximum resonance of the thermal boundary layer is triggered by a perturbation at the characteristic frequency of the boundary layer. For the boundary-layer flow at $\mathit{Ra}= 3. 6\times 1{0}^{10} $ and $\mathit{Pr}= 7$, a net heat transfer enhancement of up to 44 % is achieved by triggering resonance of the boundary layer. This significant enhancement of heat transfer is due to the resonance-induced advancement of the laminar–turbulent transition, which is found to be dependent on the perturbation frequency and amplitude. Evidence from different perspectives revealing the same position of the transition are provided and discussed. The outcomes of this investigation demonstrate the prospect of a resonance-based approach for enhancing heat transfer.