Abstract
Resistive switching characteristics of thermally oxidized tungsten thin films and their switching mechanism were investigated, modifying thickness of the active layer (WOx) by varying oxidation conditions. Two types of switching were observed in Pt/WOx/W memory devices. Thinner film (t ≤ 15 nm) exhibits clockwise switching (CWS) with filamentary characteristics, whereas thicker film (t ≥ 25 nm) exhibits counter-clockwise switching (CCWS) with more homogeneous conduction. Both switching modes are highly reliable and show good cycling endurance. The conduction phenomena in two different switching modes were examined. In the case of CWS, the conduction mechanism changes from Schottky emission to ohmic conduction due to the local bypass of Schottky barrier formed at Pt/WOx interface by oxygen vacancies. Contrary to CWS, CCWS showed a completely different conduction mechanism. The high resistance state is dominated by the Schottky emission at low electric field and by Poole–Frenkel emission at high electric field, whereas the low resistance state exhibits the Schottky emission. Different types of switching behavior might be attributed to the non-homogenous defect distribution across the active layer. A possible conduction sketch for two types switching behaviors is also discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
