Resistance Prediction on Submerged Axisymmetric Bodies Fitted with Turbulent Spot Inducers

Abstract

A method to predict bare hull ship resistance is presented in this article. Hull resistance is assumed to consist of friction drag and residual drag. The friction drag coefficient is represented by an equivalent flat plate coefficient multiplied by a form factor to incorporate effects of body geometry and boundary layer (BL) characteristics on drag. Theories of form factors including the effect of BL transition locations have been successfully derived. Form factors are shown to have a noticeable effect on body drag at high Reynolds numbers (Re) and a significant effect at model Re. Residual drag coefficient is obtained from model tests with application of scaling formulae to relate model scale residual drag coefficient to full scale drag coefficient. To address the issue of laminar flow on models in residual drag measurements, a new device termed a "turbulent spot inducer" is introduced in model tests. Finally, a new scaling formula to relate model scale residual drag coefficient to full scale residual drag coefficient with the flow on body surface partly laminar and partly turbulent is derived. It is shown that a traditional 1þK scaling method used in the marine industry is a special case of the newly derived residual drag scaling formula.