Abstract
In this paper several features of the HAZ between the weld metal and the parent metal, after the heat cycle produced by a SMAW process in 450 N/mm 2 HSLA steels are analysed, taking into consideration the temperatures reached in the HAZ as from Rosenthal's equation. The aspects under examination are: grain morphology by means of micrographs obtained with the Scannig Electron Microscopy to check the bands that control the grain size due to the microalloyings of the designed steel, taking into account the temperatures reached and the cooling rate in each of the HAZ regions; fracture toughness, checked by means of CTOD testing; hardness grain size determined by the Ashby and Esterling procedure [1] and based on the values obtained with the Heyn method [2] , ratio between stable growth and heat input; CTOD values which are found to be satisfactory under the welding conditions with a heat input of 1.6 Kj/mm.
Highlights
Summary
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.