Residual stresses in polymers. II. Their effect on mechanical behavior

Abstract

AbstractThe distribution of density and tensile properties in quenched modified poly(phenylene oxide) specimens was investigated. Quenching was carried out from temperature level above Tg to below Tg temperatures. Simultaneous to buildup of residual stresses, profiles of density and tensile properties were observed. The profiles were obtained using the layer removal technique, which was found not to affect the measured properties. Quenching of the material results in a steep density gradient in the surface layers. Correspondingly, the tensile modulus increases significantly from the surface to the inner layers and so are also the ultimate tensile properties. This behavior could be accounted for neither by the conventional packing volume approach nor by superposition of internal and external stresses. However, observations of the fracture surfaces are very supportive and indicate that the fracture initiation sites are influenced by the residual stresses. Hence, the mechanical behavior is strongly affected by both density and residual stresses profile. Density is the controlling factor in determining the elastic properties whereas residual stresses determine the ultimate strength and fracture mechanism.