Residual stresses in circular steel tubular columns repaired by laser-cladding additive manufacturing

Abstract

This paper presents a study that investigates the magnitude and distribution of residual stress (RS) in laser cladding (LC) repaired circular steel tubular columns. The study involves experimental tests and numerical simulation. The familiar blind-hole method is employed in the experimental investigation for two RS measurement tests, while the finite element method is used for numerical thermal-mechanical analysis to obtain the temperature field and RS field. The results indicate the presence of residual tensile stress in the LC sheet and its surrounding area. The RS in the LC sheet area and in the vicinity of the LC sheet-substrate boundary is much greater than that in the substrate area located far away from the LC sheet. Additionally, the RS in the LC sheet along the scanning direction is larger than that perpendicular to the scanning direction. Nevertheless, the RS values in both the LC sheet and substrate are less than their respective yield strength values. The temperature-time cooling curves obtained from the finite element analysis, which simulate the laser cladding process for repairing the circular steel tubular column, are used to develop a theoretical model for predicting the RS in the LC sheet. A simplified RS model is proposed based on the thermal-mechanical theory, utilising the linear-exponential two-stage cooling curve. Comparisons between the experimental results and the theoretical results that are predicted using the proposed simplified RS model show both results to be in good agreement. Therefore, the simplified RS model proposed in this paper is suitable for efficiently and accurately predicting the RS in LC sheet for circular steel tubular columns repaired by LC.